Notices
 

Thread: getting into giant scale

Results 1 to 4 of 4
  1. getting into giant scale 
    #1
    Join Date
    10-29-2002
    Location
    Grand Island, New York
    Posts
    2
    looking for info on large scale planes........Im building a Sig 1/3 Spacewalker.....trying to decide what engine to use ,kit calls for 1.5 to 2.4 two stroke....any info is appreciated
     

  2. ENGINES 
    #2
    Most folks I've seen with the 1/3 scale Spacewalker have been using G62's in them. Seems to work really well... The kits seem to build out a bit heavier than expected, so the power would be welcome. I know the airframe handles the engine just fine.

    Phil in Austin
    Lower!!
     

  3. Post Engine 
    #3
    Join Date
    12-07-2002
    Location
    illinois
    Posts
    1
    Fly my 1/3 scale Spacewalker with a G-38. If you like a slow lazy type flight it is a good combo but short on power for maneuvers.

    A G-62 or comperable engine would work well.
     

  4.  
    #4
    Join Date
    10-29-2002
    Location
    Grand Island, New York
    Posts
    2
    thanx for the info....im looking at a ZdZsportsman 40...anybody hear anything about these?
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •